Products may be labeled as fitting either the left or right side. The left or right side can be determined by your position while sitting in the car facing forward. Your left would be the left side and your right would be the right side.
This rebuild service is performed on YOUR Bearing Assembly (which will require you to send in your Unit to us first)
Your Unit is disassembled, inspected & cleaned. All critical dimensions are measured and parts undergo our rigorous inspection process. The support & caliper bracket must be reuseable & within specifications. If these additional parts are required you will be contacted prior to the repair.
The unit is then reassembled with New Spindle, Bearings, Seals, Races, & Backing Plates
You will need to re-use your existing Spindle Flange (100ft lbs torque)
