Corvette Year:
Cart Wishlist
Welcome, you are not logged in. Login / Sign Up
  • Part Number: 238980
  • Reproduction: This part is made as close to OEM specifications as possible.
  • Selling Unit: each
Your Price:
$89.00 /each

This item is in stock.

Shipping Notes:

Standard Shipping

Buy a Pair & Save $10.00:


This product can expose you to chemicals including Cadmium which is known to the State of California to cause cancer on birth defects or other reproductive harm. for more information, visit www.P65Warnings.ca.gov.

* Many of the parts listed on this website are not manufactured by the original equipment manufacturer and any reference to trademark or part numbers are for cross reference purposes only. No representation is made with respect to the source of manufacture of any particular part.

Product Details

 Size:   4 3/4"W x 10 1/2"L.   2 1/8" deep

It will be nesessary to reuse original mounting strap & soldered wire connector harness (or purchase new)

These speakers are manufactured in the USA using compact high energy neodymium (NEO) magnets that allow these 4 x 10" speakers to fit where others won't. Neodymium magnets (commonly referred to as super magnets) are 1/10 the physical size of round ceramic magnets found on most modern speakers but provide the same or higher field strength. These speakers are true 8 ohm impedance and are fully compatible with 10 ohm Delco speakers. The improved construction includes whizzer cones for improved high frequency response and fabric or sanoprene rubber surround and larger spiders for improved low frequency response. They work exceptionally well with original Delco radios and will make your classic radio sound better than new.  5 year warranty against manufacturing defects.

Note: Many replacement speakers now sold by the discount stores, auto parts stores and mail order restoration parts houses are labeled as  "4 to 8 ohm compatible"  and are in fact 4 ohm speakers. These speakers can damage the older transistor radios. 4 ohm speakers will measure around  3.2 ohms with a DC ohmmeter. An 8 - 10 ohm speaker will measure around 7.4 ohms with a DC ohmmeter. The DC resistance is the critical number for the Delco radios as the output transistor is in series with the speaker. A 4 ohm speaker will draw twice the current of an 8 ohm and cause the amplifier transistor (the half dollar size device mounted to the black finned heat sink on the back of a Delco radio) to run very hot. The speaker cone should be displaced in an upward (away from the magnet) direction about 1/8" when a Delco radio is turned on. If the cone moves down toward the magnet, the speaker leads need to be reversed.  Warning: Never run 4 ohm speakers on any vintage car automobile radio using transistor output circuits.

This product fits the following Corvette model years:

1968 Corvette
1969 Corvette